🔗 The full course : https://core-electronics.com.au/cours...

In this video, we will get into the thick of it and learn to set digital outputs on the pins of our Pico*. We will take a look at digital outputs in the context of the Pico, then go through a practical example of it where we flash the *onboard LED and also set some voltages on our *external pins*.

🔧🔨🧰 Hardware featured in this guide:

Pico:
https://core-electronics.com.au/catal...
LED Pack:
https://core-electronics.com.au/catal...
Breadboard:
https://core-electronics.com.au/catal...
Jumper Wires:
https://core-electronics.com.au/catal...

💡❓ If you have any questions about this content or want to share a project you're working on head over to our maker forum: http://coreelec.io/forum

0:00 Digital Outputs on the Pico
0:58 Digital Outputs Example
4:36 Indentation Syntax
5:41 Running it on the Pico
6:38 Lighting up an External LED
8:35 What can we do with this?
9:31 3 Key Takeaways

🌏🦘 Core Electronics is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:

• Raspberry Pi https://core-electronics.com.au/raspb...
• Arduino https://core-electronics.com.au/ardui...
• Sparkfun https://core-electronics.com.au/brand...
• Adafruit https://core-electronics.com.au/brand...
• Pololu https://core-electronics.com.au/brand...
• DFRobot https://core-electronics.com.au/brand...

The following trademarks are owned by Core Electronics Pty Ltd:

"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo