This is a step-by-step install of the Unplugged Performance Carbon Fiber Racing Brake Cooling Duct Kit! An absolute must if you are tracking your Tesla Model S Plaid.

This includes the modification of the front fascia (bumper), installing the carbon fiber tubes, the CF rotor shields, swapping out new racing brake pads in the carbon ceramic big brakes… to buttoning everything up and checking the clearances.

1:00 where to buy your private jet parts
1:50 duct kit parts overview
5:10 begin disassemble front end
6:15 wheel liner
7:00 remove front fascia (bumper)
10:02 remove grill piece
14:20 cutting hole in grill piece
18:10 prepping front under cover support bars
19:58 install carbon fiber tubes
23:30 foam anti-rattle install pass side
26:02 install front fascia (bumper)
31:55 front calipers removed
33:00 brake pad wear review
34:10 wheel speed sensor silicone tube
36:48 heat tube wire prep
39:00 install brake shield pass side
40:40 connecting ducting driver side
45:39 connecting ducting passenger side
49:30 zip tying ducting in place
51:50 reinstalling carbon ceramic brakes
1:00:35 reinstall wheel liner
1:02:38 reinstall front underbody piece
1:04:20 checking clearances
1:06:10 final thoughts
1:07:00 finished pictures of install



To see the printed Unplugged Instructions, go here:
https://unpluggedperformance.com/inst...

Make sure you SUBSCRIBE to our channel if you haven't already.

******
Most parts on my car are from Unplugged:
To upgrade your Tesla, contact Kirk Nason, Unplugged Performance Tesla Specialist, at [email protected]

Thanks for your support!
LIKE- COMMENT- SUBSCRIBE

******
And if you want some super light and strong wheels, talk to Jamie at Signature Wheel.
Use discount code: PLAIDAF500 for $500 off a set!

BTW, the coupon code only works from this link https://secretev.com/collections/mode...

https://www.signaturewheel.com
******