Going DEEP into the Diesel Fuel SYSTEM... Can the Pro's HELP? ~ 1995 Gehl 5625sx Skid Loader P4
Salvage Workshop Salvage Workshop
250K subscribers
172,929 views
0

 Published On Apr 9, 2023

I am not the kind of person that likes to have others do things for me, but sometimes it's best to know when to ask for help! Today I will be doing JUST that!

I have repaired many injection pumps on my own, but I was unsuccessful getting the machine to run properly after all the work I did trying to make it work... so it's time to bring in the professionals!!

Today we're taking the injection pump & injectors from our Perkins 204.25 diesel engine to Area Diesel Service in Carlinville, IL, and they're going to help me figure out what's going on and show me how the PRO's rebuild & tune an injection pump!

If you have a need to have an injection pump rebuild, injectors tested, turbos replaced or rebuilt, or just parts for your diesel project, these are the guys to contact!

Area Diesel Service Inc.
https://www.areadieselservice.com/
   / @areadieselservice  
Phone: 800.637.2658

Sit back, relax, and enjoy the process the pros go through to rebuild an injection pump and test injectors! After that, we'll get it all put back together and see if the skid steer will FINALLY come back to life!

~

0:00 - Previously...
0:46 - Going to Area Diesel Service for Pump Help!
1:21 - Pop testing Fuel injectors at Area Diesel Service
4:37 - Injection Pump Rebuild & Testing at Area Diesel Service
17:50 - Recap of what we did at Area Diesel Service
19:06 - Installing the Injection Pump on the Perkins Diesel Engine
20:38 - Preparing to reinstall the Timing Cover
24:10 - Making a gasket for the Timing Cover
28:11 - Installing the Timing Cover
32:02 - Making a water neck gasket
32:23 - Replacing the solenoid on the starter
36:24 - Reinstalling the back of the engine
37:34 - Priming the fuel system
41:01 - Let's Talk about FAILURE
42:20 - Digging into the Glow Plug Circuit
45:05 - Trying to start the engine
45:57 - Testing the Compression in each cylinder
52:25 - Problems with the Glow Plug Circuit
57:36 - FINALLY starting the ENGINE!!!
1:00:38 - Battery cable repair
1:01:56 - Another Start Attempt
1:02:14 - Finally MOVING the Skid Steer!
1:03:24 - What's Next on this old Skid Steer?
1:06:23 - A BIG Thank you to YOU for the Support! I TRULY appreciate it!

~

If you have any suggestions, questions, or comments, please leave them below!

Thanks for stopping by, I truly appreciate your support!

#AreaDieselService #skidsteer #salvageworkshop
@AreaDieselService

show more

Share/Embed