Major Mods:
245 RS4s
Wilwood 12.88" 4-piston w/ G-loc R12 Front, R8 Rear
Ohlins DFV 12kg/6kg
Karcepts 0.188" front & rear bars
APR GTC-200 Wing
DIY chassis-mount splitter
JBR diff mount (Source of the audible gear whine)

Alignment:
29psi hot
Camber -2.5F, -2R
Toe 0F, +1/16R
(Tire pyro says inside shoulder is 10F hotter than center and outside for each corner)

Second time at Laguna, getting the karcepts bars dialed in with the new 12kg/6kg setup. Settled on settings 1/5 front and 3/5 rear. I prefer the higher rear spring bias that I had running 12kg/7kg. It puts the front bar in a better usable range. The car got into ABS easier than I would have liked, so I'm most likely stepping back down to 10kg/6kg for the next track day.

01/10/2021 Track Day w/ OnGrid
Follow the build on Instagram: @Aarons_ND2