Click for more info and reviews of this Lippert RV Door Parts:
https://www.etrailer.com/Accessories-...
Check out some similar RV Door Parts options:
https://www.etrailer.com/dept-pg-Acce...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-review-li...
Hey everybody! Welcome to etrailer.com! I'm Bobby, and today we're taking a look at the Lippert Toy Hauler Patio Upgrade Kit. It's gonna give us a nice a little patio if we want it. However, we're not gonna sacrifice our ramping capabilities too. So, if we're still want to haul something inside of our toy hauler or if you just wanted that patio set, this can be an excellent option. With 3,000 pounds capacity for it in its ramp position, we should have no trouble getting our ATVs, UTVs, or anything else that fits within those requirements up inside our toy hauler, and with a 1,500 pound capacity for a patio setup, we should have no trouble of getting a lot of people on the back of our toy hauler and being the envy of the camp ground. As you guys can see here, we are having a 94-by-94 door for ourselves to get today.

I'm gonna go ahead and just double check that for ourselves. Let me go ahead. And of course my tape measure won't work with me. Brad, go ahead and hang on there for me, my man. No problem.

Get a handy friend of course. As you can see, it's actually sitting right over that, about 95.25 inches there for that outside opening. So, later on as we drop this guy, we're going to go ahead and take a look on that flush positioning. That's going to put you closer to that 94 inches, and that's going to be what you really want to look for, of course, is that inside opening on your toy hauler to make sure it is going to fit for ourselves. Now, you are getting a nice little fiberglass feel on this guy.

So, you're just going to be knowing it's going to be holding up well for the weather to come. However, of course, it has been reinforced to go ahead and allow us to utilize it as a ramp to get those heavy toys inside of our hauler. At the very end you are seeing those hinges there. Quite a few hinges, so you know it's going to do a good job of supporting that weight and bringing itself down in no time. Of course, it won't take too much time to get those actually installed, just a simple little hinge maneuver to get it set in our toy hauler.

Well, but just for a second here, we're going to go ahead, drop it down, and start taking a look on the other side. One thing I would like to point out, you guys can see as we are lowering this down, we are a little worried about the front edge of our gate here. So if you ever want to keep that looking nice for the time to come and especially if you find yourself utilizing this in that ramp position a lot and you're driving those toys over it, it can benefit us to get something that can cover that top of the gate. So, something like a rubber bumper can be excellent. There's a few of them available here at etrailor.com, and of course, any other type of application you can to really prevent any damage to this is really going to help in the long run. Now that we got it laid down, we're going to go ahead and just double check our measurements here. As you can see, going straight across is going to be putting us at 93.25 inches for ourself. And that can be really important in your toy hauler 'cause we actually want this to seat properly and seal. Now, talking of seals, we definitely want to make sure our toy hauler actually has a seal for this as we don't want water coming in. So if your toy hauler doesn't have one, that can be another expenditure to pick up. However, we're really going to need it 'cause we don't want that rain comin' in, destroyin' any of our toys, or especially the inside of our toy hauler. So, we can go ahead and also look at our length going across here just to double check that Inside measurement for ourselves. And going straight across here, we are looking right at 93.25 inches as well. So, looks like we are standing right in those dimensions, which is great for ourselves. Talking about the material itself. You are gonna see a nice little rough pad here on the back end. That's going to be great for when everybody is hanging around on the patio. Even if it does get a little wet, maybe a light rain comes through, we're not going to be worried about slipping. It has a really good kind of friction-ized feel to it, so it'll definitely be holding up quite well. Not going to be slippin' or doin' any kind of damage to ourselves which is excellent for us. Right here in the middle, you are going to see an insert already ready to get that in that patio position. So, we will need to pick up a cable, and that is also available here at etrailer.com. But all we want to do is measure where we have this level o