0:00 Intro
0:27 PIN LOCK - Initial release
1:59 Double Bypass
2:20 New 2.5.9 Security/PIN Menu
3:09 PedalDisable aka KillPedalNow
3:59 PIN Pedal, brakes, lights, horn
5:01 Carjack Mode
6:48 Pin Clear
7:07 KillByFob
10:12 Generally how thieves steal cars
11:10 KillByFob Best Practices
11:49 Final Steps

This video goes over all the new features of the TaZer Security/PIN Menu in TaZer Firmware 2.5.9 - This firmware is currently in beta, but can be downloaded directly from our Z-Automotive ZPU Software.

There are a ton of new features in the TaZer which should help to deter automotive theft of Mopar vehicles.

The TaZer is an electronic programmer which can be used in Mopar vehicles including the Dodge Charger, Challenger, Chrysler 300, Jeep Grand Cherokee, and Dodge Durango. The TaZer has a ton of features and functions that it can unlock, but we are excited to reveal our newest PIN LOCK features.

When triggered, PIN LOCK lock up the vehicles brakes, flash the exterior lights, sound the horn, and even disable the gas pedal.

Choices within the Security/PIN menu include:
• Set/Clear PIN – allows you to set a new PIN (if unlocked) or clear the PIN (quick if unlocked, times if locked)
• Enable/Disable PIN – allows a quick disable without having to clear and then re-set PIN.
• KillPedalNow– a “high security parking” mode where you can pre-disable the gas pedal, even if the Tazer is removed, can toggle on and off. Automatically re-enabled when PIN is entered.
• PIN Brakes – choose if the 4 brakes will lock when PIN triggered and vehicle is stopped.
• PIN Horn – choose if the horn is to blow in a semi-random pattern when PIN is triggered.
• PIN Lights – choose if the light show starts when the PIN is triggered.
PIN Pedal – choose if the accelerator pedal is disabled when PIN is triggered.
Will also disable pedal if vehicle alarm is triggered or a key pairing is attempted. If enabled this function will operate even if PIN function is disabled. Note: When pedal is disabled there will be several warning chimes and lights as if there are vehicle errors. When re-enabling the pedal while the vehicle is running, the engine may stumble or stall. These are normal.
• KillByFob – If enabled, locking the vehicle by keyfob will disable the accelerator pedal. Unlocking with THE SAME FOB will re-enable the pedal. If enabled this function will operate even if PIN function is disabled. If a PIN is set (regardless if PIN enabled or not) and the vehicle is entered without using the same keyfob used to lock it, the PIN will need to be entered to unlock. Flashes exterior lights 2 extra times to show as confirmation the pedal has been disabled or enabled. Requires that a PIN is set as a backup method to disable. VIN must match too, to prevent using another Tazer to re-enable the pedal.
• Carjack – Enables/disables Carjack protection. Carjack triggers whenever the key exits a running vehicle. Requires PIN set and Pin Enable are on.
• PIN Clear Time – choose if it should take 10 or 60 minutes to clear a forgotten PIN.

(Backdoor to unbrick pedal and clear PIN by using key supplied by customer service.)

Purchase your TaZer Module here: https://www.zautomotive.com/product/z...

Purchase your Double Bypass here: https://www.zautomotive.com/product/z...

Follow Us:
Facebook -   / zautotech  
Instagram -   / z_automotive  
Tiktok -   / zautotech