How and When to Use a Japanese Pull Saw
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse

Cost: $20-$100, depending on the tool

Shopping List:
- Japan Pull Set, which is manufactured by Tajima (https://amzn.to/2GKXFVd).

Steps:
1. Unlike traditional Western hand saws, the Japanese pull saw’s teeth are angled in the opposite direction, meaning that the cutting action happens when you pull the saw towards you instead of pushing away from you.
2. Japanese pull saws are also usually more flexible than traditional saws, so it’s great for flush cuts, like cutting trim along a floor or a bung on a flat surface.
3. There are basic Japanese pull saws that have teeth on both ends, which allows for both cross cuts and rip cuts. Higher end saws come with interchangeable blades and usually last a lot longer, but are more expensive.

Resources:
A standard Japanese pull saw can be found at almost any home center. The one that Nathan demonstrated with the interchangeable blades is the Japan Pull Set, which is manufactured by Tajima (https://amzn.to/2GKXFVd).

Expert assistance with this segment was provided by Nathan Gilbert Carpentry.

Looking for more step by step guidance on how to complete projects around the house? Join This Old House INSIDER to stream over 1,000 episodes commercial-free: https://bit.ly/2GPiYbH

Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet:
https://bit.ly/34RYEP5

Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
http://bit.ly/AskTOHIG

For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite

How and When to Use a Japanese Pull Saw | Ask This Old House
   / thisoldhouse