How to Install Hard Wired Smoke Detector - Easy Installation First Alert Smoke Detector Model 9120B

First Alert Smoke Detector (9120B): https://amzn.to/3FMIoQ2

Replacing a smoke detector can be really easy, especially with units like the one shown in this video from First Alert. What makes installation of these First Alert detectors easy is because they include wiring adapters for existing Kidde and FireX smoke detectors. That means if you have one of those two brands already in your home, this job is going to be a snap! But if you have to use the bare wire connector for your installation, stay till the end and I'll show you how connect the raw wires. So let's get started!

First, I'll turn off the power to the smoke detector in the room I'm working in. To remove this old Kidde unit, all I need is a quick clockwise turn to detach it from the ceiling. To remove the wiring harness, squeeze the side tabs and pull it straight out.

I won't be able to use the existing ceiling plate so just loosen the 2 screws holding it in and slide it off. Then separate the First Alert mounting plate and install this new one on the ceiling. The screw positions in the ceiling box are universal so this will slip on very easily. Then just tighten the 2 screws to secure it. But don't over-tighten them!

Wiring is really easy with the Kidde brand wiring adapter. It simply plugs into the existing connector coming out of the ceiling! If this was a FireX detector, I'd just use the other wire harness that came with the package. Before the new smoke detector goes on the ceiling, I need to insert the included 9 volt battery for backup. And I made sure I had the polarity correct before closing the battery tray.

The wiring harness now plugs into the back of the First Alert unit. Just make sure it's good and tight. Now align the detector with the ceiling plate and twist clockwise until it's secure. And that's pretty much it! Hopefully you're able to see how the installation with the included adapters made this super easy!

And if for some reason neither of those adapters work for you, here's how to connect this First Alert smoke detector by hard wiring it. I have to start by removing the old wire harness. And it's connected with wirenuts. Start by untwisting the wirenut on the black set of wires. And I'm just going to go one wire at a time starting with the black wires. Connecting this is easy by holding the bare ends of the wires together and attaching the wire nut. Be sure it's good and tight.

And then continue just like before with the white wire. The color coding on these wires are pretty easy to match up but I'm still going to detach and reattach these one at a time. And finally, connect the red wire. It's the same process on all the wires and it's safe to do when the power is shut off. When the red wire is detached I'm able to completely remove the old wiring harness. Then pull off the rubber cap and then connect it to the red wires coming out of the ceiling.

Last step is to stuff the wires into the ceiling box and connect the new smoke detector like I did before. Don't worry if you don't have any experience replacing a smoke detector! With the help of my instructions, I'm really confident you can do this yourself! Now just flip the breaker back on and it's good to go! I've also listed the exact First Alert smoke detector here in the description so it's easy for you to find!

If this video was helpful, please give me a thumbs up and hit the subscribe button to stay up to date on all my weekly videos!


Disclaimer: As an Amazon Associate I earn from qualifying purchases.

***Equipment I Use For My Videos***

Canon EOS M6: https://amzn.to/2pwQ0Vq
Canon EF-M 22mm f/2 Lens: https://amzn.to/31mLfLq
Tokina 11-16mm Wide Angle Lens: https://amzn.to/33TFaYH
Fotodiox EF to EOS M Lens Adapter: https://amzn.to/31u3AGq
Comica CVM-WM300A Wireless Microphones: https://amzn.to/31tbiAD
Aputure Amaran AL528W LED Light: https://amzn.to/2VRuwyK
Kamerar SD-1 Camera Slider: https://amzn.to/2VUB5Ax
AVermedia HDMI Game Capture Module: https://amzn.to/31phsSp