Buy Now!
New Suspension Knuckle Assembly Kit from 1AAuto.com http://1aau.to/ib/1AAXX00257

This video shows you how to install new front loaded knuckles from TRQ on your 2012-2017 Toyota Camry.

This repair was done on a 2014 Toyota Camry SE 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Toyota Camry
2013 Toyota Camry
2014 Toyota Camry
2015 Toyota Camry
2016 Toyota Camry
2017 Toyota Camry

Tools you will need:
• 17mm Socket http://1aau.to/ob3f/1AXAA00015
• 19mm Socket
• 21mm Socket
• 22mm Socket http://1aau.to/orJ/1AXAA00266
• 30mm 12-Point Socket http://1aau.to/oar/1AAST00002
• 1/2 Inch Impact Gun http://1aau.to/oxY/1AXAA00252
• 3/8 Inch Impact Gun
• 1/2 Inch Breaker Bar http://1aau.to/orx/1AXAA00078
• Socket Extensions http://1aau.to/ob3f/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oa7T/1AXAA00044
• Anti-Seize Grease
• Gloves http://1aau.to/oaWE/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oauv/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/oagy/1AXAA00065
• Large Hammer

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.