In today's video a buddy and I replace the power steering pump on a 2014 Infiniti Q60 with the 3.7 naturally aspirated V6 engine.

This installation process is pretty much universal to all 3.7 equipped Nissan/Infinity cars including, but not limited to:

Infinitis:
- EX35, EX37, FX35, FX37, M35.
- Q40, Q60, Q70 Q70L, QX50.

Nissan:
- 370Z

#nissan #infiniti #370z #g37 #350z #g35 #q60 #q50 #tutorial #install #help #guide

The Nissan VQ37VHR is a 3.7 l (3,696 cc, 225.53 cu.in.) V6 4-stroke natural aspirated gasoline engine from Nissan VQ-family. The engine is producted on Nissan’s Iwaki factory since 2007. The VQ37VHR engine was honored by Ward’s 10 Best Engines list in 2008.

The VQ37VHR features a lightweight aluminum block with a fully balanced four-bearings crankshaft and two aluminum heads with two camshafts (DOHC) and four valves per cylinder. The Nissan VQ37VHR engine is equipped with CVTC (eVTC), VVEL system and NDIS (Nissan Direct Ignition System) with individual coils on each spark plug.

Compression ratio rating is 11:1. Cylinder bore and piston stroke are 95.5 mm (3.76 in) and 86.0 mm (3.38 in), respectively. It produces from 330 PS (242 kW, 325 HP) at 7000 rpm on the European version of Infiniti FX37 and EX37 up to 355 PS (261 kW, 350 HP) at 7600 rpm on Nissan Fairlady Z (Nismo version). The maximum torque is 374 Nm (38.13 kg·m, 275.8 lb·ft) at 5200 rpm.

The breakdown of the engine code is as follows:

VQ – Engine Family
37 – 3.7 Liter Displacement
V – VVL (Variable Valve Lift)
HR – High Response and High Revolution