Published On May 29, 2021
Transforming 7 T-Shirts using a 3D printed Tulle. I hosted a T-shirt flipping design competition on my Instagram in which all of you had a chance to participate by submitting your designs. Hope you enjoy watching.
SUBSCRIBE TO MY CHANNEL (it’s free): https://www.youtube.com/channel/UC1y6...
INSTAGRAM: / sewprinted
_____________________________
5 Ways to 3d Print Fabric: • 5 Ways to 3D Print Fabric | Experimen...
V- Neck Video: • How to Make a V-Neck from a Crewneck ...
Software Used:
- AutoCad
- Rhinoceros
- Cura (slicer)
Filament:
- FilaFlex 82A by Recreus
Printer:
- Artillery Sidewinder X1: https://www.amazon.com/Artillery-Side...
Print Settings:
Layer height: 0.2mm
Wall Thickness: 2mm
Wall line count: 3
Top/Bottom Thickness: 0
Top Thickness: 0
Top Layers: 0
Bottom Thickness: 0
Bottom Layers: 0
Infill Density: 10%-50% (depending on how see through)
Infill Pattern: Gyroid or Cubic Subdivision
Print Temp: 210 C
Initial Layer Temp: 210 C
Build Plate Temp: 0 C
Print Speed: 20mm/s
Infill Speed: 20mm/s
Wall Speed: 10mm/s
Initial Layer Speed: 5mm/s
Enable Retraction: checked
Retraction distance: 5mm
Retraction Speed: 25mm/s
Music:
Dreams by Joakim Karud
/ joakim-karud-dreams
_____________________________
Also shown in this video:
Glue: https://www.amazon.com/dp/B000Y3LHXW?...
3d Pen: https://the3doodler.com/collections/c...
3d Pen Filament: https://the3doodler.com/collections/a...