How to Make a PVC Pet Cot or Bed Video will show you step-by-step how to sew an elevated dog bed or cot. This dog bed is made from PVC pipe and outdoor mesh fabric from Sailrite. Making the frame is easy and the sewing can usually be accomplished with a home sewing machine. We made this bed from Sunbrella Sling fabric, so it's easy to clean and tough enough to resist ripping.

Most of the materials needed to complete this project are available at http://www.sailrite.com.

How to Make a PVC Dog Bed Chapters:
• Building PVC Frame -- 0:19 min
• Patterning Mesh -- 2:04 min
• Sewing Corner Binding -- 5:11 min
• Attaching Zipper -- 7:29 min
• Creating Sleeves -- 10:31 min
• Fitting on Frame -- 13:48 min
• Materials List -- 14:58 min

MATERIALS LIST:
Sunbrella Sling Fabric or Phifertex Plus Fabric - https://www.sailrite.com/Fabrics/Outd...
Thread Polyester V-69 (For Home Machines ) or V-92 (For Industrial Machines) - https://www.sailrite.com/Notions/Thre...
Bias Binding Stamoid Vinyl White 3/4" - https://www.sailrite.com/Binding-Stam...
YKK Zipper #10 Vislon Finished White Single Pull - https://www.sailrite.com/YKK-Zipper-1...

TOOLS LIST:
Sewing Machine - https://www.sailrite.com/Sewing-Machi...
Marker, Hacksaw, Rubber Mallet, Yardstick, Scissors
Schedule 40 PVC Pipe 1" or 1 1/4" (available at hardware store)
4 PVC Side Outlet Elbows (available at hardware store)
Tape Measure 120 Inch - https://www.sailrite.com/Tape-Measure...
Dry Silicone Lubrication (optional)
Fabric Marking Pencil Yellow - https://www.sailrite.com/Marking-Penc...