Prevent water from puddling in your yard and near your home’s foundation using the gravel-free NDS® Flo-Well® Dry Well. The Flo-Well is an alternative to traditional dry wells and retains excess water runoff and slowly percolates it into the ground.

******************************

Resources:
NDS Stormwater Drainage Tools App

NDS Stormwater Management Channel
▶︎    / ndspro  

Home Drainage Center
▶︎ https://www.ndspro.com/home-drainage

Find a Contractor
▶︎ https://www.ndspro.com/contractor

Flo-Well® Dry Well
▶︎ https://www.ndspro.com/products/drain...

EZ Flow French Drain
▶︎ https://www.ndspro.com/products/drain...

Drainage Calculator
▶︎ https://www.ndspro.com/tools-and-calc...

******************************

Timestamps:
0:00 - Opening
0:10 – Introduction to Flo-Well
0:21 - Before You Dig
0:49 - Getting Started
1:01 - Tools Needed
2:10 – Select Backfill Method
2:37 - Layout and Dig the Hole and Trench
3:26 - Assemble Flo-Well
4:54 – Install Flo-Well
5:21 – Backfill with EZ Flow and Soil
5:56 – Closing

WHAT IS AN FLO-WELL® DRY WELL?
The Flo-Well Dry Well is a lightweight system that consists of 3 interlocking side panels and 1 cover. The gravel-free dry well holds up to 50 gallons and can temporarily store and slowly release water runoff back into the ground through the open bottom and side knockout weepholes. It can also connect to 4 in. drain pipes from any of the 12 side-panel knockout points to convey water for proper release downstream. The Flo-Well Dry Well System can be installed by itself or as part of a larger integrated drainage system. If you need to hold additional water, Flo-Well dry wells can be stacked up to four high, or put as many units as needed in a line.

EZ DRAIN INSTALLATION STEPS
Have underground utility lines marked so you can avoid them
Gather required Flo-Well Dry Well, Filter Fabric, Surface Drain Inlet with Grate, EZ Flow pipeless bundle, Tuff Track Paver, Universal Locking Outlet, and tools
Dig a minimum 3 ft. 2 in. deep hole with 4 ft. diameter
Dig trench for EZ Flow or pipe with a minimum 1% slope towards the Flo-Well; recommended for positive drainage
Use a hammer to knock out locations where the drain pipes will enter the Flo-Well
Assemble Flo-Well
Carefully cut along cutout line of knockout hole and connect universal adapter to Flo-Well
Use hammer to remove center knockout on lid and attach Surface Drain Inlet
Prepare base of hole with 24 in. Tuff Track Paver and place Flo-Well on top
Wrap Flo-Well in filter fabric, cut holes where pipe will connect; use tape to secure
Backfill with soil or with pipeless EZ Flow for the largest water storage capacity

Standing water can cause flooding and costly damage to your foundation and landscape. Using the Flo-Well® Dry Well as a part of a complete drainage system can remove water runoff and percolate it into the ground or convey it to a point of release downstream.

An NDS drainage system such as the Flo-Well® Dry Well can drain standing water in your yard and protect your landscape from flooding. This drainage product captures and detains excess surface water before allowing it to naturally percolate into the ground and can also convey water for release downstream. With NDS, you can create a lasting drainage solution easily and inexpensively. Start planning your drainage project today!


#DryWell
#FloWell
#FloWellDryWell
#Flo-Well
#NDSTraining
#StopBasementFlooding
#EZFlow
#StopFloodingOnLawn
#DrainWaterInYard
#HowToDrainWaterFromYard
#NDS
#Drainage
#DrainageSolution
#StormwaterManagement
#DrainageSystem
#GravelfreeDrain

Subscribe for stormwater management solutions:
   / ndspro  


LET’S CONNECT!
Facebook ▶︎   / ndsinc  
Pinterest ▶︎   / ndsinc