How to Rebuild a Hose Spigot | Ask This Old House
This Old House This Old House
2.07M subscribers
2,848,234 views
0

 Published On Mar 18, 2018

Ask This Old House plumbing and heating expert Richard Trethewey repairs a leaky hose spigot.
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse

Time: 2 hours

Cost: $50

Skill Level: Moderate

Tools List for Rebuilding a Hose Spigot:
- Adjustable pliers [https://amzn.to/2MLB0hv]
- Wrench [https://amzn.to/2MOC1p5]
- Flathead screwdriver [https://amzn.to/2MO6gwk]
- Valve receding tool [https://amzn.to/2XgmBxZ]

Shopping List:
- Rubber washer replacement kit [https://amzn.to/2WBCBWY]
- Teflon packing [https://amzn.to/2Ih8PTs]
- Richard uses a rubber washer [https://amzn.to/2Xgn6bl] and bonnet [https://amzn.to/31ARb4W] for the repair, which can be found at the local home center
- For the seat repair, Richard uses a seat grinder [https://amzn.to/31C7nTx] (aka Dresser) that can be found at the local home center.
Steps:
1. Shut off the water to the spigot.
2. Remove the valve from the spigot by loosening the bonnet with the pliers and a wrench.
3. Remove the washer on the bottom of the valve. It should be held down with a screw that can be loosened with the flathead screwdriver.
4. Replace the washer with one from the kit. Place it on the valve, smooth side out, and tighten the screw back on.
5. Loosen the bonnet to expose more of the thread on the underside of the handle of the valve.
6. Apply Teflon packing around the thread about 1 ¼ times. Tighten the bonnet on top of the Teflon.
7. Use the valve receding tool in the spigot to smooth the seat to receive the new washer.
8. Tighten the valve back on the spigot and turn the water back on.

Resources:
Richard uses a rubber washer and bonnet for the repair, which can be found at the local home center.

For the seat repair, Richard uses a seat grinder (aka Dresser) that can be found at the local home center.

About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.

Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
http://bit.ly/AskTOHIG
Tumblr: http://bit.ly/ThisOldHouseTumblr

For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite

How to Rebuild a Hose Spigot | Ask This Old House
   / thisoldhouse  

show more

Share/Embed