Lamp Restoration [Easy Removing Patina From Brass, Sandblasting]
153,090 views
0

 Published On Dec 2, 2023

In this restoration of the old rusty lamp, I use simple means (flour, salt, vinegar) to remove the patina from the brass. In this project I also show you how I remove the rust from the parts by sandblasting, but my tasks also include sanding, welding, painting, filling, cleaning, polishing and working on the lathe. You can find out whether the lamp lights up again at the end in this video!

▶ What did I do ?! ◀

I removed the rust from the old lamp by sandblasting. A hole was drilled in the base of the lamp, which I welded shut again, as the hole made no sense to me. After all the unevenness had been filled with filler, I sprayed the parts with spray paint. The frame is made of brass, which was covered with a layer of patina. I removed the patina with simple means (flour, salt and vinegar) - this works very well. These parts were then polished. I washed, sanded and polished the remaining small parts. Immediately after reassembly, a light went on for me too ...

▶ Good to know ◀

I used the following tools: Rust remover spray, combination pliers, side cutters, screwdriver, wrench, sandblasting cabin, corundum abrasive, pin punch, hammer, angle grinder, multi-function tool, milling attachment, copper, welding machine, welding helmet, filler, Playing card, spatula, sandpaper (various grits), sandpaper file, isopropanol, cleaning cloth, spray paint, adhesive tape, knife, flour, salt, vinegar, spoon, cling film, washing-up liquid, brush, polishing bench, polishing paste, lathe, file

▶ Special thanks to my channel members! ◀

⭐Fred Chipps

▶ Do you want to support me? ◀

Would you like to become a channel member? Then you can do it here:
   / @forgottenshinerestoration  

You like what you see and you want to help the channel to develop continuously? If you want to support me you can donate via Paypal:
https://www.paypal.com/donate?hosted_...

or use the following affiliate links:

Material for work:

Metabo bench grinder https://amzn.to/46rrkxL
Metabo cordless screwdriver BS 18 LTX-3 BL https://amzn.to/43833JV
Metabo bit set https://amzn.to/3pzwV4n
File set Gedore https://amzn.to/3NWmXU1
Sandpaper file https://amzn.to/3PBNo2D
Polishing paste https://amzn.to/3DYfHRA
Rust Remover Spray: https://amzn.to/48r91te
Proxxon multi-function tool: https://amzn.to/47BdrwU
Corundum Abrasive: https://amzn.to/47JviSr
Grinding discs: https://amzn.to/3TpxudJ
Sandpaper: https://amzn.to/3N9IeIY

Equipment:

Camera Sony AX-53 https://amzn.to/3XHqI2J
Ring light https://amzn.to/3rhgj1Q
Microphone Rode https://amzn.to/44vlFF1
DJI Gimbal Camera https://amzn.to/3O1YjkJ

Affiliate links don't cost you anything, I just get a small share from the seller, you have no disadvantage from it.

▶ Did you like it? ◀

Did you like the video?

Then like, subscribe and share it, please!

Thanks a lot!

show more

Share/Embed