In this video I will show you how to install the Embrace Making Wire Harness and Hose Management System for the XTOOL D1 Pro. It is an easy way to greatly improve the longevity of the machine by reducing tight bends and pinch points of the harness.

You can find this kit on my website here:

► https://embracemaking.com/products/xt...

One of the biggest shortcomings of the XTool D1 pro is the wire management system from the factory. The placement of the various wire harnesses seem to be an afterthought and they are sometimes in the path of moving parts, getting pinched between the gantry and rear frame member, or even encroaching on your work space where they will come in contact with your workpiece. Once air assist is added, another unruly hose is getting tangled in the mix.

To fix all of these issues, this wire and hose management system organizes the harness and air assist hose so that they bend naturally in each axis. It also moves these components away from the bottom of the frame to avoid flexing into the work space and provides more room between the gantry and rear frame member. The rear limit switch can now be reliably activated without obstruction.

All of this can be achieved without the use of expensive cable chains. Cable chains (or drag chains) are intended to be used with expensive harnesses and hoses rated for use in the abrasive environment of the inside of a cable chain in industrial settings. You do not incur these unnecessary costs for this application.

This kit is fully compatible with the XTool D1 Pro frame extension and also with the XTool enclosure.

Note that the wire harness included in this kit will not fit a NON-PRO machine. The regular D1 has an 8 pin connector whereas the D1 PRO has a 9 pin connector. If you wish to use this kit on the NON-PRO machine you will need to source your own connectors. It can be done but would require you to re-pin the included harness using 8 pin connectors.

Perhaps you saw some other interesting upgrades in this video...

You can find the XTool D1 LED Lighting Kit here:
► https://embracemaking.com/products/xt...

You can find the RA2 rotary switch here:
► https://embracemaking.com/products/xt...

Original RA2 tutorial video:
►    • XTOOL RA2 PRO In-Depth Setup Guide, A...  

Also very popular for the D1 Pro...

RA2 Tilt Mechanism
► https://embracemaking.com/products/xt...

PCB and Button Cover Kit
► https://embracemaking.com/products/xt...

Fume Extractor Nozzles

10W
► https://embracemaking.com/products/xt...

20W
► https://embracemaking.com/products/xt...

40W
► https://embracemaking.com/products/xt...

As an Amazon Associate I earn from qualifying purchases (at no extra cost to you):

XTOOL RA2 PRO
► https://www.xtool.com/collections/acc...

XTOOL D1 Pro 10W
► https://www.xtool.com/products/portab...

XTOOL D1 Pro 20W
► https://www.xtool.com/products/portab...

XTOOL D1 Pro 40W
► https://www.xtool.com/products/d1-pro...

Laser Proof Silicone Work Surface Mat (20" x 28")
► https://amzn.to/3zDyMG7

Laser Proof Silicone Work Surface Mat (23.5" x 31.5")
► https://amzn.to/3A0Fzv1

0:00 Intro
1:03 Assembly
14:43 Outro

#xtool #lasercutting #laserengraving

****************************************************************************

If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:

► https://www.paypal.com/donate/?hosted...

By supporting my channel you are encouraging me to continue with this time consuming endeavor.

Follow me on Instagram!

►   / embracemaking