Arai Tour-X5 helmet can be mounted with a Pinlock and features a new visor design that is both horizontally and vertically round, which enhances the effectiveness of the Pinlock 120 XLT. The Arai Tour X5 comes with a Pinlock 120 XLT included in the price of the helmet.

Instructions: To mount a Pinlock lens on an Arai Tour-X5 helmet, follow these steps:

1. Prepare the Helmet and Visor: Ensure your Arai Tour-X5 helmet and its visor are clean and dry. It's best to work in a clean, well-lit area to avoid any dust or dirt getting trapped during the installation.

2. Remove the Visor from the Helmet: Carefully detach the visor from the helmet. Most modern helmets, including the Arai Tour-X5, have a simple mechanism for removing the visor without needing tools. Typically, you lift the visor to its highest position and release it from the helmet's retaining clips or mechanism. WARNING: Do not touch the Pinlock on the side that faces the visor.

3. Identify the Pinlock Pins: The Arai Tour-X5 visor will have small pins on the inside. These are specifically designed for attaching the Pinlock lens. These pins are adjustable and allow for tension to be set on the Pinlock lens to create a proper seal.

4. Align the Pinlock Lens: Take your Pinlock lens and align it with the pins on the visor. The Pinlock lens will have holes or notches that correspond to these pins.

5. Attach the Pinlock Lens: Carefully attach the Pinlock lens to the visor by snapping it onto the pins. It's important to ensure the lens is evenly seated against the visor to prevent any air gaps. Adjust the tension on the pins if necessary for a snug fit. It may be necessary to bend out and significantly flex the visor to enable it to fit properly between the pins.

6. Reinstall the Visor: Once the Pinlock lens is securely in place, reattach the visor to the helmet. Ensure it is correctly and securely fitted back into the helmet's visor mechanism.

7. Check for Proper Fit: Before using the helmet, check that the Pinlock lens is correctly installed and there are no air gaps around its edges. The lens should sit flush against the visor, with no ripples or bends.

#araihelmet #motorcycle #touring #pinlock #motocross
@AraiAmericas
@araihelmet