Installation of rear and upper motor mounts on my 2020 Hyundai Veloster N PP


Tools needed:
Floor Jack. https://amzn.to/2SayqBv
Floor Jack Puck. https://amzn.to/3j9Lgfh
Jack Stand Pads. https://amzn.to/3cD57Bm
2 Jack Stands. https://amzn.to/2HwiIP7
Flathead Screwdriver. https://amzn.to/36b8Apj
Ratchet. https://amzn.to/2S1m52L
Ratchet extension. https://amzn.to/2G7Ula6
Breaker bar. https://amzn.to/3364dKb
10mm Socket. https://amzn.to/345c9Le
14mm Socket. https://amzn.to/3kRK40z
17mm Socket. https://amzn.to/30ecB8L
18mm Socket. https://amzn.to/3mWEITH
24mm Socket. https://amzn.to/3j7zCS8
17mm Wrench. https://amzn.to/341aPsQ
18mm Wrench. https://amzn.to/2G7V2Ae
24mm Wrench. https://amzn.to/3cC7unL
Thread Locker. https://amzn.to/36dUC6i
Torque wrench capable of at least 160 lb-ft. https://amzn.to/3cCb15J

For the 17mm bolt and nuts, tighten anywhere between 46.9 lb-ft - 54.2 lb-ft
For the 14mm nut and bolts you do anywhere from 36.2 lb-ft - 47 lb-ft
24mm is torqued to 160 lb-ft


Boomba Racing Rear Motor Mount
https://www.boombaracing.com/hyundai-...

Turbo Tech Racing Upper Motor Mount
https://www.turbotechracing.com/produ...


Don't forget to like, subscribe and comment if you have any questions!
Follow me on instagram! chrizzz619
Thanks for watching :)