300 hours of printing later, I bring to you the Zortax Inventure Review.

Does it deliver!?

Yes, I think it does. Soluble supports, reliable printing and the added HEPA filter make this a great addition to a home, office or print farm.

Zortrax Inventure Specifications
- Build volume: 135 x 135 x 130 mm (5.3 x 5.3 x 5.1 in)
- Material diameter: 1.75 mm (0.069 in)
- Nozzle diameter: 0.4 mm (0.016 in)
- Dual, printing with model and support material
- Material detection sensor (for filaments in cartridge only)
- HEPA filter
- Connectivity: SD card (included)
- Assisted Levelling: Automatic measurement of platform points’ height
- Enclosed Heated Chamber up to 80˚C

This printer is available directly from the Zortrax store:
https://store.zortrax.com/

You can also browse their other printers here (If this one is anything to go by, I may be trying more in the future)
https://zortrax.com/3d-printers/

Thank you for watching, don't forget to like and subscribe =)

If you want to support me and the channel, you can either buy me a coffee or buy some 3DTomorrow Filament if you're here in the UK.

PayPal.me/callumcoles
https://3DTomorrow.com

00:00 Introduction
00:29 Spec Check
02:22 The Review
03:20 Pro 1 - Dual Extrusion
04:14 Pro 2 - Bed Levelling
04:58 Pro 3 - Bed Durability
05:42 Pro 4 - Reliability
05:57 Pro 5 - HEPA Filter
06:14 Bonus - Scraper
06:28 Pro 6 - It Just Works
07:08 Pro 7 - Build Quality
07:25 Proprietory
08:00 Pro 8 - Material Range
08:31 Con 1 - Material Loading
09:03 Con 2 - Spool Capacity
10:05 Con 3 - Build Plate
10:57 Con 4 - Draft Excluder
11:27 Con 5 - Proprietory
12:29 Recommendation
13:50 Print Example
14:53 DSS Wash Station
15:11 Solution Disposal
16:39 Before Removal
18:07 After Removal

#Zortrax #DualExtrusion #3DPrinterReview