Hi Guys!

Video shows me making 3D relive in sapele hardwood.
I wood carved a tiger. Design was purchased from Ebay...

🔔 Subscribe for more CNC and woodworking videos just like this🔔
   / @falcon390cncworks  

✅CNC I recommend✅
1️⃣ OpenBuilds CNC router: https://openbuildspartstore.com/lead-...
2️⃣ INTERFACE CNC Touch: https://openbuildspartstore.com/inter...
3️⃣ XYZ Touch Probe Plus: https://openbuildspartstore.com/xyz-t...

✅Router bits I recommend✅
1️⃣ Starter Kit 💰budget friendly💰: https://geni.us/LiJ5vH
1️⃣ Starter kit (Sharkbits) https://openbuildspartstore.com/3d-si...

🤝HELP SUPPORT THE CHANNEL 🤝
1️⃣ Patreon: https://patreon.com/Falcon390CNCWorks...
2️⃣ Etsy: https://www.etsy.com/uk/shop/Falcon39...
3️⃣ Buy me pizza🍕: https://www.buymeacoffee.com/falcon39...

✅ For inquiries contact me at:
📧 [email protected]

.....................................................................................................
CNC router job setup info:

Toolpath: 3D Roughing toolpath 6mm Endmill CNC router
Toolpath Info
Time Estimate: 00:20:49
Toolpath Type: Rough Machining Toolpath
Feed Rate: 2600 mm/min
Plunge Rate: 500 mm/min
Spindle Speed: 18000
Tool InfoTool Name: End Mill (6 mm)
Tool Type: End Mill
Tool Number: 1
Max Cut Depth: 14.992mm
Pass Depth: 3.5mm
Stepover: 4.8mm

Toolpath: 3D Finish toolpath 1mm Bullnose bit CNC router
Toolpath Info
Time Estimate: 05:42:29
Toolpath Type: Finish Machining Toolpath
Feed Rate: 1500 mm/min
Plunge Rate: 700 mm/min
Spindle Speed: 18000
Tool InfoTool Name: Ball Nose (1mm)
Tool Type: Ball Nose
Tool Number: 1
Max Cut Depth: 16.658mm
Stepover: 0.1mm

..............................................................................................................

Second channel-FALCON390 Workshop
   / @falcon390workshop  

#CNCrouterproject
#DesktopCNC
#OpenbuildsCNC
#woodworking
#cncrouter