Ask This Old House Host Kevin O’Connor helps an accessibility contractor install a home elevator for a young man with disabilities.
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse

Time: Several days

Cost: $25,000 – 35,000

Shopping List:
Hydraulic home elevator lift
Home elevator enclosure

Steps:
1. Pour concrete pad for the base of the elevator.
2. Hoist the tower section with a chain pull and level it in place with a level.
3. Stabilize the tower by attaching the legs with bolts and washers using a drill/driver.
4. Hoist the second section of the tower on top of the first portion with a chain pull.
5. The first and second sections of the tower are combined using bolts and washers.
6. Fill the reservoir for the hydraulics with transmission fluid.
7. Place platform base on top of the legs.
8. Secure the platform with bolts and washers using a drill/driver.
9. Place the floor on top of the platform and secure it with fasteners.
10. Secure 42-inch panels on three sides of the platform.
11. Install enclosure around the lift to keep out rain, snow and wind.

About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.

Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
http://bit.ly/AskTOHIG
Tumblr: http://bit.ly/ThisOldHouseTumblr

For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite

How to Install a Home Elevator | Ask This Old House
   / thisoldhouse