Better 3D Resin prints is only possible if your resin temperature is ideal. Enclosure heaters can achieve this, but building them can be tricky and unnerving. So here I've designed one to make the process as friendly as possible, with easily printable parts and step by step instructions. I also made use of Elegoo Thermochromic Resin, with pleasing results.

🔹 VOGs HEATER BODY STL FILES 🔹
▶ https://etsy.me/3DDEE5K

🔹 WIRING DIAGRAM 🔹
▶ https://vegoilguy.co.uk/heater.php

🔹 ELEGOO THERMOCHROMIC RESIN 🔹
▶ https://bit.ly/3zmqBPm

🔹 WHAM BAM HOTBOX 🔹
▶ https://bit.ly/3DgxH9d and use the discount code VOG2022 (this code is valid until mid 2023)

🔹 PARTS LIST 🔹

UK - https://amzn.to/3VP8Odl - STC-1000
UK - https://amzn.to/3SlWApi - 80mm fan
UK - https://amzn.to/3z1XUXL - Thermostatic Switch NC45 ̊C
UK - https://amzn.to/3SlCLOY - GU10 25W Halogen
UK - https://amzn.to/3F4SuPx - GU10 Holder
UK - https://amzn.to/3SjErsn - 15 Amp Terminal Block
UK - https://amzn.to/3sfNdNG - M4 hex bolts
UK - https://bit.ly/3DdYfcq - Elegoo Thermochromic Resin (optional)

US - https://amzn.to/3gseA46 - STC-1000
US - https://amzn.to/3CPYRUk - 80mm brushless mains fan
US - https://amzn.to/3TIzBpw - Thermostatic Switch NC45 ̊C
US - https://amzn.to/3SnCz1P - GU10 25W Halogen
US - https://amzn.to/3sfS01C - GU10 Holder
US - https://amzn.to/3MOlxc7 - 20 Amp Terminal Block
US - https://amzn.to/3grtlV4 - M4 hex bolts
US - https://bit.ly/3DdYfcq - Elegoo Thermochromic Resin (optional)

CA - https://amzn.to/3VN8MSX - STC-1000
CA - https://amzn.to/3Sld9Su - 80mm fan
CA - https://amzn.to/3TpfIUU - Thermostatic Switch NC45 ̊C
CA - https://amzn.to/3TK5BtH - GU10 25W Halogen
CA - https://amzn.to/3SnRZ6d - GU10 Holder
CA - https://amzn.to/3MOlL2X - 20 Amp Block
CA - https://amzn.to/3VN8Imw - M4 hex bolts
CA - https://bit.ly/3DdYfcq - Elegoo Thermochromic Resin (optional)

DE - https://amzn.to/3iqu0HC - STC-1000
DE - https://amzn.to/3ZlOQZl - 80mm fan
DE - https://amzn.to/3vP6vuV - Thermostatic Switch N45 ̊C
DE - https://amzn.to/3CXDT6T - GU10 25W Halogen
DE - https://amzn.to/3Xh11ER - GU10 Holder
DE - https://amzn.to/3ZmxJqg - 15 Amp Block
DE - https://amzn.to/3WXLRom - M4 hex bolts
DE - https://bit.ly/3DdYfcq - Elegoo Thermochromic Resin (optional)

Shopping List / Parts
When it comes to shopping for parts, most of the items for this project I found on Amazon. Some you’re going to want to match exactly, like the controller and the fan, as the heater body was designed around these. When it comes to bolts, terminal blocks, bulbs, etc, feel free to shop around. I’ve done my best to make things simple here, but simple isn’t always frugal, so do look around.

💚💚💚 PLEASE SUPPORT THIS CHANNEL 💚💚💚
The price of a cup of coffee can really help me grow my channel. If you can spare a little, please consider becoming one of my Patrons. You can read more about this here:
🟢   / vegoilguy   😃
Or if you prefer to make a PayPal donation, you can do that here
🟢 https://www.vegoilguy.co.uk/donations 😁

🔹 MY LINKS 🔹
▶ http://vogman.co.uk
▶   / thevogman  
▶   / the_vogman  
▶ https://rumble.com/c/c-2100620
▶ https://vogsmerch.myspreadshop.co.uk
▶ https://etsy.com/uk/shop/VegOilGuy
▶   / vegoilguy  

🔹 DISCLAIMER 🔹
Please remember, I’m no electrician. I’m just a keen amateur. I have tested my enclosure heater as thoroughly as I can, and have not detected any issues that would give me cause for concern. But I could be wrong, I’m only human.
I’ve tried to make the electrical side of things as easy as possible, but ultimately you are responsible. I can’t be there with you; I can’t ensure you fit everything properly and I can’t be fully sure you use the heater safely. For this reason, I urge you to be careful.
If you’re not fully confident in handling electrics, don’t do it! It’s not worth the risk. Contact a qualified electrician.
This project makes use of mains voltage components which have the potential to harm or even kill you. Caution is strongly advised.
When dealing with electricity, always isolate and disconnect the power source. Make use of an RCD (earth leakage device) and ensure your supply is up to code. Fit a smoke alarm nearby as a precaution. Use quality products, insulate any bare connections and protect the unsuspecting from potential harm. Never leave the heater running unattended. Be vigilant in use.
All the responsibility for this project has to lie with you. If in doubt, if it all unsure, don’t do it. You’re much too valuable.
Play safe!!!

0:00 - Introduction
0:39 - Why use an enclosure heater?
1:16 - Previous heater
2:02 - Concept
6:06 - Parts
11:52 - Thermochromic Resin
12:28 - Assembly
20:20 - Programming the controller
21:50 - Enclosure options
23:33 - Summary


#3dprinting
#vegoilguy
#vog