DIY Wire EDM is finally a reality! This has been on our DIY CNC machine radar for quite some time, and finally we have done it. We added this attachment onto an old DIY CNC Machine. After all, it's an extremely rigid epoxy granite CNC machine with a perfectly fine X Y Z motion system. We hope that getting a good working Wire EDM machine will help us produce better tolerance cuts in metals for our DIY homemade shop.

While this was just our first round of prototyping, we will continue to work on this DIY Wire EDM machine and turn it into a proper homemade CNC EDM Machine.

Make sure to follow our CNC adventures by hitting the SUBSCRIBE button right away - it helps our channel grow!

Free Design Files: https://actionbox.ca/pages/diy-wire-edm

Power Supply: https://actionbox.ca/products/edm-pow...
Plastic Parts: https://actionbox.ca/products/wire-ed...
Drive Rollers: https://actionbox.ca/products/drive-r...

Ways To Support Our Channel:
Merchandise: https://actionbox.ca/collections/merc...
Become A Member:    / @actionbox  

Instagram:   / action.box  

Check Out These Other Machines We Built:
We built a CNC Machine
   • Homemade CNC Machine! (6 months of wo...  

We built a Wire EDM
   • How We Made A Wire EDM Machine At Home  

We built an EDM Sinker
   • Homemade EDM Sinker  

We built a Plastic Injection Machine
   • Homemade Plastic Injection Machine | DIY  

We built an Anodizing Setup
   • Homemade Anodizing Setup  

We built CNC Router
   • HOMEMADE CNC ROUTER.  

#CNC #machineshop #DIY #epoxy #mill #engineering #machine